Saltar al contenido principal
Inglés
Español
Paso 2
Make sure the drill is not plugged in. In our case, this was easy. With a Phillips size 2 screwdriver, unscrew the four 40mm screws from the front body. The front comes right off. Unfortunately this part is very rigidly put together, in fact so rigidly we were not able to disassemble it any further.
  • Make sure the drill is not plugged in. In our case, this was easy.

  • With a Phillips size 2 screwdriver, unscrew the four 40mm screws from the front body.

  • The front comes right off. Unfortunately this part is very rigidly put together, in fact so rigidly we were not able to disassemble it any further.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.