Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español
Paso 2
Locate and remove the three multicolored wire connectors which connect the circuit board to the other printer components. Remove each connector by hand, as shown. You can use tweezers if it is too difficult to remove them by hand.
  • Locate and remove the three multicolored wire connectors which connect the circuit board to the other printer components.

  • Remove each connector by hand, as shown. You can use tweezers if it is too difficult to remove them by hand.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.