Saltar al contenido principal

Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 7 guías que incluyan este paso.

Inglés
Alemán
Paso 4
Using a T9 Torx screwdriver, remove the two 15mm silver screws that are holding a circuit board/panel to the side of the interior metal casing. Using the same screwdriver, remove the 9mm black screw located farther to the right on the same circuit board/panel. Using the same screwdriver, remove the 9mm black screw located farther to the right on the same circuit board/panel.
  • Using a T9 Torx screwdriver, remove the two 15mm silver screws that are holding a circuit board/panel to the side of the interior metal casing.

  • Using the same screwdriver, remove the 9mm black screw located farther to the right on the same circuit board/panel.

Entferne die beiden silberfarbenen 15 mm Torx T9 Schrauben, mit denen die Platine an der Seite des Metallgehäuses befestigt ist.

Entferne die schwarze 9 mm Torx T9 Schraube weiter rechts an der Platine.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.