Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Alemán
Paso 2
Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.
  • Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.

  • When removing this connector, it is helpful to use your thumbnails to push the ears on either side of the connector toward the top of your iMac.

Löse den Stecker des Kabels zum Thermosensor des optischen Laufwerks, indem du ihn in Richtung Oberkante des iMac ziehst.

Es ist dabei hilfreich, wenn du beide Nasen auf den Seiten des Steckers mit den Daumennägeln in Richtung Oberkante des iMacs drückst.

-[* black] Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.
-[* icon_note] When removing this connector, it is helpful use your thumbnails to push the ears on either side of the connector toward the top of your iMac.
+[* red] Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.
+[* icon_note] When removing this connector, it is helpful to use your thumbnails to push the ears on either side of the connector toward the top of your iMac.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.