Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.

  • Remove four T10 Torx screws securing the power supply to the rear case.

  • Two fine-thread 7 mm T10 Torx

  • Two coarse-thread 7 mm T10 Torx

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.