Repara tus cosas Comunidad Tienda

iRobot Roomba 980 Rear Wheels

Introducción

The rear wheel assembly is what propels the roomba. If they become damaged the roomba will begin to move irregularly or not at all.

Qué necesitas

  1. iRobot Roomba 980 Rear Wheels, Battery: paso 1, imagen 1 de 1

    • Flip over the device and remove the two 11.5 mm screws using the Phillips #1 screwdriver.

    Editar

  2. iRobot Roomba 980 Rear Wheels: paso 2, imagen 1 de 2 iRobot Roomba 980 Rear Wheels: paso 2, imagen 2 de 2

    • Unscrew the back plate using a Phillips #1 screwdriver.

    • Carefully lift the panel up once the screws are removed.

    Editar

  4. iRobot Roomba 980 Rear Wheels: paso 3, imagen 1 de 2 iRobot Roomba 980 Rear Wheels: paso 3, imagen 2 de 2

    • With both hands, grab the two black tabs on each end of the battery.

    • Pull the tabs upwards to remove the battery.

    Editar

  5. iRobot Roomba 980 Rear Wheels, Rear Wheels: paso 4, imagen 1 de 2 iRobot Roomba 980 Rear Wheels, Rear Wheels: paso 4, imagen 2 de 2

    • Loosen the screw on the side brush.

    • Lift the side brush from the device.

    Editar

  6. iRobot Roomba 980 Rear Wheels: paso 5, imagen 1 de 2 iRobot Roomba 980 Rear Wheels: paso 5, imagen 2 de 2

    • Unscrew the (2) 11.5mm screws using the Phillips #1 screwdriver.

    • Carefully remove the plate by lifting it off of the device.

    Editar

  7. iRobot Roomba 980 Rear Wheels: paso 6, imagen 1 de 2 iRobot Roomba 980 Rear Wheels: paso 6, imagen 2 de 2

    • Removing the brush module may ease the removal of the wheel module

    • Locate the (3) 15.8mm gold Phillips #1 screws and unscrew them.

    • Lift the wheel module removing it from the vacuum.

    • Remove the other wheel by repeating these steps.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Ernesto Rodriguez Romero

Miembro Desde 09/27/17

965 Reputación

4 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

USF Tampa, Team S14-G2, Boczar Fall 2017 Miembro de USF Tampa, Team S14-G2, Boczar Fall 2017

USFT-BOCZAR-F17S14G2

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 11

Todo El Tiempo: 3,143