Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Start by locating the yellow side brush on the underside of the iRobot Roomba 860 near the front of the device.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a Philips #2 Point Screwdriver, remove the screw located in the center of the brush.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull up on the side brush and it should slide off, free of the motor shaft.
-
Remove any debris that could be preventing the side brush from spinning and/or replace the side brush.
-