Saltar al contenido principal

iRobot Roomba 805 Motor Replacement

Qué necesitas

  1. iRobot Roomba 805 Motor Replacement, Side brush: paso 1, imagen 1 de 1
    • Remove the single 6.1mm Phillips #0 screw from the side brush.

  2. iRobot Roomba 805 Motor Replacement: paso 2, imagen 1 de 1
    • Lift the side brush, removing it from the motor.

  3. iRobot Roomba 805 Motor Replacement, Motor: paso 3, imagen 1 de 2 iRobot Roomba 805 Motor Replacement, Motor: paso 3, imagen 2 de 2
    • Remove the battery panel and the two screws behind the wheels.

    • Lift up the back panel and remove it from the Roomba.

  4. iRobot Roomba 805 Motor Replacement: paso 4, imagen 1 de 1
    • Remove the three screws holding down the motor. Be aware one requires a tristar bit and the plastic piece under that screw comes free easily.

    • Once the motor is loose you can pull it up out of the Roomba.

  5. iRobot Roomba 805 Motor Replacement: paso 5, imagen 1 de 3 iRobot Roomba 805 Motor Replacement: paso 5, imagen 2 de 3 iRobot Roomba 805 Motor Replacement: paso 5, imagen 3 de 3
    • Hold the motor by the bottom and the edge of the cap and remove the cap.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Grady Landers

Miembro Desde 11/05/19

617 Reputación

5 Guías creadas

Equipo

Un comentario

What is the point of step 5??

overkillx7 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 17

Todo El Tiempo: 886