Repara tus cosas Comunidad Tienda

iRobot Roomba 675 Brush Replacement

Introducción

If the brushes on your Roomba get stuck or aren’t spinning, you may need to replace them. Follow these steps to replace the brush assembly in your iRobot Roomba 675.

  1. iRobot Roomba 675 Brush Replacement, iRobot Roomba 675 Brush Replacement: paso 1, imagen 1 de 1

    • Flip the device over to expose the bottom of the device. Using your hands, press on the two yellow tabs to expose the brush assembly.

    Editar

  3. iRobot Roomba 675 Brush Replacement: paso 2, imagen 1 de 1

    • Grab the bushes on the side and push to the right and pull up in order to take out the brushes.

    Editar

  4. iRobot Roomba 675 Brush Replacement: paso 3, imagen 1 de 1

    • From here on out you can clean the brushes and refollow the instructions backwards in order to reinstall the brushes again.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Jorge Baquier

Miembro Desde 02/13/20

97 Reputación

1 Guía escrita

Insignias: 2

Equipo

University of North Texas, Team S1-G5, Thomas Spring 2020 Miembro de University of North Texas, Team S1-G5, Thomas Spring 2020

UNT-THOMAS-S20S1G5

3 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 14

Todo El Tiempo: 1,208