Repara tus cosas Comunidad Tienda

iRobot Roomba 630 Bin and Filter Cleaning and Replacement

Introducción

If your Roomba stops picking things up the bin may be full and needs to be cleaned or a part of the bin may be broken and the bin needs to be replaced. If it is neither of those your filter may need to be replaced. This guide will show you how to do so.

Qué necesitas

  1. iRobot Roomba 630 Bin and Filter Cleaning and Replacement, Bin and Filter: paso 1, imagen 1 de 2 iRobot Roomba 630 Bin and Filter Cleaning and Replacement, Bin and Filter: paso 1, imagen 2 de 2

    • Push the bin button and pull the bin out

    Editar

  3. iRobot Roomba 630 Bin and Filter Cleaning and Replacement: paso 2, imagen 1 de 1

    • Press the tab and pull open to access the contents of the bin.

    • Dump the contents of the bin out.

    Editar

  4. iRobot Roomba 630 Bin and Filter Cleaning and Replacement: paso 3, imagen 1 de 2 iRobot Roomba 630 Bin and Filter Cleaning and Replacement: paso 3, imagen 2 de 2

    • Pull on the 2 yellow tabs to slide the filter out.

    • Remove the filter.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Jabari Baptiste

Miembro Desde 10/03/17

485 Reputación

3 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

USF Tampa, Team S5-G3, Walkup Fall 2017 Miembro de USF Tampa, Team S5-G3, Walkup Fall 2017

USFT-WALKUP-F17S5G3

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 8

Todo El Tiempo: 660