Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

iRobot Roomba 560 Side Sweeper Replacement

Qué necesitas

  1. iRobot Roomba 560 Side Sweeper Replacement, Side Sweeper: paso 1, imagen 1 de 1
    • Flip the Roomba upside down.

    • Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips #2 driver.

  2. iRobot Roomba 560 Side Sweeper Replacement: paso 2, imagen 1 de 1
    • Lift the yellow side sweeper, removing it from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Mairead Blaes

Miembro Desde 10/01/15

825 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 1-22, Maness Fall 2015 Miembro de Cal Poly, Team 1-22, Maness Fall 2015

CPSU-MANESS-F15S1G22

4 Miembros

14 Guías creadas

2 comentarios

I need to replace the part on the bottom where the side sweeper screws in. The threads are stripped, I’m guessing, and screw won’t stay in.

Candy Schnurr - Contestar

put some hot glue or melt some plastic in the hole before screwing it. you should get the threads back when you unscrew it

Nicolas Sicard -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 20

Todo El Tiempo: 1,666