Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the Roomba upside down.
-
Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips #2 driver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the yellow side sweeper, removing it from the device.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the Phillips #2 driver, remove the four 10 mm screws that hold the back panel in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the back panel to remove it from the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the yellow battery by pulling up the green tabs on its side.
-
Cancelar: No complete esta guía.
10 personas más completaron esta guía.