Saltar al contenido principal

Introducción

This guide explains how to remove the side brush motor from your Roomba.

Partes

No se especificaron partes.

  1. Place your Roomba upside-down on a hard surface.
    • Place your Roomba upside-down on a hard surface.

  2. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

  3. Gently pull upwards on the brush to remove it.
    • Gently pull upwards on the brush to remove it.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Rotate the Roomba upside-down so the bottom is facing towards you.
    • Rotate the Roomba upside-down so the bottom is facing towards you.

  6. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.
    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

  7. Carefully lift the bottom plate.
    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

  8. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly.
    • Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly.

  9. Gently pull on motor assembly to remove.
    • Gently pull on motor assembly to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Jacobs

Miembro Desde 31/01/14

525 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 13-14, Regan Winter 2014 Miembro de Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Miembros

13 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 713