Repara tus cosas Comunidad Tienda

iRobot Roomba 4100 Brush Guard Replacement

Introducción

Removing the brush guard will be easy. It won't take more than 5 minutes to complete and no tools are required.

  1. iRobot Roomba 4100 Brush Guard Replacement, Brush Guard: paso 1, imagen 1 de 1

    • Lay the Roomba upside down on a flat surface with the blue strip away from you.

    Traducir

  3. iRobot Roomba 4100 Brush Guard Replacement: paso 2, imagen 1 de 2 iRobot Roomba 4100 Brush Guard Replacement: paso 2, imagen 2 de 2

    • Use your index fingers to pull the yellow tabs towards you.

    • While still pulling the yellow tabs with your index fingers, tilt up the brush guard.

    • For reassembly, make sure to push in the brush guard until it clicks into place.

    Traducir

  4. iRobot Roomba 4100 Brush Guard Replacement: paso 3, imagen 1 de 1

    • Pull back the brush guard to unhook it from the latches.

    • Remove the brush guard by lifting it up and out of the Roomba.

    • This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Samantha Barrett

Miembro Desde 01/13/14

501 Reputación

5 Guías creadas

Insignias: 3

Equipo

Cal Poly, Team 17-5, Forte Winter 2014 Miembro de Cal Poly, Team 17-5, Forte Winter 2014

CPSU-FORTE-W14S17G5

5 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 703