Saltar al contenido principal

Introducción

The battery is an essential component to the iRobot Braava 320. Without a functioning battery, your iRobot could have trouble turning on, staying on, or charging. Replacing the battery may solve these issues.

Partes

No se especificaron partes.

  1. Flip your device over and locate the battery cover.
    • Flip your device over and locate the battery cover.

    • The battery cover is located in the center of the device in between both wheels.

  2. Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora

    Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora
  3. Using a Flathead #4 screwdriver, gently turn the 12mm screw that holds the battery cover in.
    • Using a Flathead #4 screwdriver, gently turn the 12mm screw that holds the battery cover in.

    • The screw does not remove, it stays attached to the cover.

  4. Gently remove the battery from the  tray and disconnect the battery  cable. To remove the battery, pull it straight up. To disconnect the cable, gently pull it straight out of the connector.
    • Gently remove the battery from the tray and disconnect the battery cable.

    • To remove the battery, pull it straight up. To disconnect the cable, gently pull it straight out of the connector.

    • To reinstall the cable, hold it near the end and gently push it in the connector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

USF Tampa, Team S1-G3, Nance Spring 2017 Miembro de USF Tampa, Team S1-G3, Nance Spring 2017

USFT-NANCE-S17S1G3

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 4

Últimos 7 Días: 25

Últimos 30 Días: 52

Todo El Tiempo: 1,490