Saltar al contenido principal

Introducción

This guide will help you in identifying the soldering joints locations for the loud speaker on the iPod Touch 4th Generation

  1. I've boxed where the ribbon cable connectors go for the screen and camera. The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.
    • I've boxed where the ribbon cable connectors go for the screen and camera.

    • The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.

    • The second picture shows the wires soldered to the logic board.

    • The loud speaker replacement was very tedious job.. anyways Good Luck

  2. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Tysl332

Miembro Desde 11/02/14

289 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 6

Todo El Tiempo: 6,094