Repara tus cosas Comunidad Tienda

iPod Shuffle 4th Generation Rear Panel Replacement

Introducción

Remove the rear panel to access the internals of your Shuffle.

Qué necesitas

  1. iPod Shuffle 4th Generation Rear Panel Replacement, Rear Panel: paso 1, imagen 1 de 1

    • Accessing the internals of the 4th generation Shuffle is extremely difficult, as the rear panel is both glued to the front case and secured by metal retaining clips. It is highly unlikely that you will be able to remove the rear panel without inflicting cosmetic and/or structural damage.

    • Before proceeding, be sure your Shuffle is switched off.

    Traducir

  3. iPod Shuffle 4th Generation Rear Panel Replacement: paso 2, imagen 1 de 2 iPod Shuffle 4th Generation Rear Panel Replacement: paso 2, imagen 2 de 2

    • Use a combination of iPod opening tools and metal spudgers to pry the rear panel away from the Shuffle by the seam nearest the ON/OFF switch.

    Traducir

  4. iPod Shuffle 4th Generation Rear Panel Replacement: paso 3, imagen 1 de 1

    • Remove the rear panel from the Shuffle.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

2 comentarios

what glue to fix it?

pedro_bizarro - Contestar

I recommend 2mm TESA tape

Ben Capehart -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 28

Todo El Tiempo: 9,496