Introducción
Replace a damaged rubber control button cover.
Qué necesitas
-
-
Remove the single 2.1 mm Phillips screw securing the logic board to the front case.
-
-
-
-
Remove the following four screws:
-
Two 1.2 mm Phillips screws with large heads.
-
Two 1.6 mm Phillips screws with small heads.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
2 comentarios
Great job my friend