Repara tus cosas Comunidad Tienda

iPod Shuffle 3rd Generation Rear Case Replacement

Introducción

Replace the rear case on your iPod shuffle for a shiny new clip.

Qué necesitas

  1. iPod Shuffle 3rd Generation Rear Case Replacement, Rear Case: paso 1, imagen 1 de 1

    • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

    • Be careful when using a metal spudger, as you may scratch the outer case.

    Editar

  2. iPod Shuffle 3rd Generation Rear Case Replacement: paso 2, imagen 1 de 2 iPod Shuffle 3rd Generation Rear Case Replacement: paso 2, imagen 2 de 2

    • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

    Editar

  4. iPod Shuffle 3rd Generation Rear Case Replacement: paso 3, imagen 1 de 1

    • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

    • Pry the rear case away from the front case.

    Editar

  5. iPod Shuffle 3rd Generation Rear Case Replacement: paso 4, imagen 1 de 1

    • Lift the bottom of the rear case and remove it from the rest of the iPod.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Matthew Newsom

Miembro Desde 01/05/10

39,500 Reputación

67 Guías creadas

Insignias: 47

+ 44 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 19

Todo El Tiempo: 8,093