Saltar al contenido principal

iPod Shuffle 3rd Generation Logic Board Replacement

Qué necesitas

  1. iPod Shuffle 3rd Generation Logic Board Replacement, Rear Case: paso 1, imagen 1 de 1
    • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

    • Be careful when using a metal spudger, as you may scratch the outer case.

  2. iPod Shuffle 3rd Generation Logic Board Replacement: paso 2, imagen 1 de 2 iPod Shuffle 3rd Generation Logic Board Replacement: paso 2, imagen 2 de 2
    • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

  3. iPod Shuffle 3rd Generation Logic Board Replacement: paso 3, imagen 1 de 1
    • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

    • Pry the rear case away from the front case.

  4. iPod Shuffle 3rd Generation Logic Board Replacement: paso 4, imagen 1 de 1
    • Lift the bottom of the rear case and remove it from the rest of the iPod.

  5. iPod Shuffle 3rd Generation Logic Board Replacement, Logic Board: paso 5, imagen 1 de 1
    • Disconnect the headphone jack and shuffle switch connector by prying it off the logic board with a spudger.

  6. iPod Shuffle 3rd Generation Logic Board Replacement: paso 6, imagen 1 de 1
    • Remove the single Phillips screw securing the logic board to the front case.

  7. iPod Shuffle 3rd Generation Logic Board Replacement: paso 7, imagen 1 de 1
    • Peel the battery up from the front case with an iPod opening tool.

    • Remove the logic board and battery from the iPod.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Matthew Newsom

Miembro Desde 01/05/10

39,496 Reputación

67 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 6,410