Saltar al contenido principal

iPod Nano 2nd Generation Bottom Bezel Replacement

Qué necesitas

  1. iPod Nano 2nd Generation Bottom Bezel Replacement, Bottom Bezel: paso 1, imagen 1 de 1
    • Before opening your iPod, ensure that the hold switch is in the locked position.

  2. iPod Nano 2nd Generation Bottom Bezel Replacement: paso 2, imagen 1 de 1
    • When removing the the bottom bezel, be sure not to bend the plastic surrounding the dock connector.

    • Carefully insert an iPod opening tool in the seam between the metal casing and white plastic bezel

    • Lift the bottom bezel off the iPod. It's glued on using a mild adhesive, so some force may be required.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 23

Todo El Tiempo: 14,684