Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

The plastic part on the bottom of the iPod.

    • Carefully insert a small flathead screwdriver or Jimmy in the seam between the metal casing and white plastic bottom Use the screwdriver to pry up the white plastic bottom bezel. Be careful not to damage the soft plastic with your screwdriver.

  1. A small pair of snap ring pliers is the easiest tool to remove the metal retaining bracket.
    • A small pair of snap ring pliers is the easiest tool to remove the metal retaining bracket.

    • You can also use a flathead screwdriver to pry out the metal retaining bracket beneath the bottom bezel as shown. You can free the bracket by first pushing in the metal arms on the corners and then lifting the bracket.

  2. Lift the metal retaining bracket out of the iPod.
    • Lift the metal retaining bracket out of the iPod.

Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

iRobot

Miembro Desde 24/09/09

1 Reputación

648 Guías creadas

After removing my bottom bezel, I needed a couple small, cut pieces of double sided tape to hold it in place upon reassembly.

Stephen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 8

Ultimos 30 días: 42

Todo El Tiempo: 17,368