Repara tus cosas

Derecho a reparar

Tienda

iPod 2nd Generation Rear Panel Replacement

Escrito Por: iRobot (y 2 de otros participantes)
  • Comentarios: 2
  • Favoritos: 2
  • Terminaciones: 4

Dificultad

Moderado

Pasos

6

Tiempo Requerido

Sugerir un tiempo??

Secciones

1

Banderas

0

Introducción

The shiny rear half of your iPod case.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Before opening your iPod, ensure that the hold switch is in the locked position.

    • Before opening your iPod, ensure that the hold switch is in the locked position.

    Editar

  2. Opening the iPod can be challenging. Don't get discouraged if it takes a few tries before the iPod is opened.

    • Opening the iPod can be challenging. Don't get discouraged if it takes a few tries before the iPod is opened.

    • Insert a plastic iPod opening tool in the seam between the white plastic front and metal back of the iPod. Once you've inserted the tool, run it along the seam to free the five tabs holding the iPod together.

    Editar

  4. Continue to run the opening tool along the side of the case until all five tabs have been released.

    • Continue to run the opening tool along the side of the case until all five tabs have been released.

    Editar

  5. Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.

    • Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.

    Editar

  6. Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.

    • Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.

    Editar

  7. Lift the rear panel away from the iPod, making sure it doesn't catch on the headphone jack.

    • Lift the rear panel away from the iPod, making sure it doesn't catch on the headphone jack.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 2 otros colaboradores

iRobot

Miembro Desde 24/09/09

1 Reputación

648 Guías creadas

Insignias: 35

+ 32 más insignias

Un Comentario

Agregar un comentario

According to this site: https://www.lifewire.com/history-ipod-cl.... The thickness of the various HD sizes is different.

“4 x 2.4 x 0.78 inches - 5 GB Model

4 x 2.4 x 0.72 inches - 10 GB Model

4 x 2.4 x 0.84 inches - 20 GB Model”

It makes some sense from other information I’ve read, but I don’t find any discussion of a thick and thin version. Is the back for the 20GB model thicker/deeper than the 10GB model? Thanks for another great guide.

Rusty Lingenfelter - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 21

Todo El Tiempo: 5,962