Saltar al contenido principal

Introducción

Prerequisite guide for disconnecting the battery connector.

    • Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:

    • Three 1.2 mm screws

    • One 2.4 mm screw

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  1. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  2. Remove the lower connector bracket.
    • Remove the lower connector bracket.

  3. Use the point of a spudger to lift the battery connector out of its socket on the logic board. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone.
    • Use the point of a spudger to lift the battery connector out of its socket on the logic board.

    • Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Evan Noronha

Miembro Desde 05/02/15

177,845 Reputación

177 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

107 Miembros

9,417 Guías creadas

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

Global: 659