Saltar al contenido principal
  1. Remove pentalobe screws with torx screwdriver.
    • Remove pentalobe screws with torx screwdriver.

  2. After using spudger or suction cup to lift screen. Be careful not to pull screen completely up. The touch id sensor flex cable is attached near the home button. There is a small metal clip that needs to be carefully pry'd off before removing flex cable connector. After using spudger or suction cup to lift screen. Be careful not to pull screen completely up. The touch id sensor flex cable is attached near the home button. There is a small metal clip that needs to be carefully pry'd off before removing flex cable connector.
    • After using spudger or suction cup to lift screen. Be careful not to pull screen completely up. The touch id sensor flex cable is attached near the home button. There is a small metal clip that needs to be carefully pry'd off before removing flex cable connector.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Disconnect battery before screen removal by removing 2 screws from shield. Once shield is removed, disconnect battery using nylon spudger. (DO NOT USE METAL TOOLS) Disconnect battery before screen removal by removing 2 screws from shield. Once shield is removed, disconnect battery using nylon spudger. (DO NOT USE METAL TOOLS)
    • Disconnect battery before screen removal by removing 2 screws from shield. Once shield is removed, disconnect battery using nylon spudger. (DO NOT USE METAL TOOLS)

  5. Remove four screws from shield covering display assembly connectors. Lift connectors using nylon spudger. Remove four screws from shield covering display assembly connectors. Lift connectors using nylon spudger. Remove four screws from shield covering display assembly connectors. Lift connectors using nylon spudger.
    • Remove four screws from shield covering display assembly connectors. Lift connectors using nylon spudger.

Conclusión

Swap all parts from old display assembly to new assembly. Do not remove all at once, replace components one at a time. To reassemble your device, follow these instructions in reverse order.

56 personas más completaron esta guía.

Fausto Lebron

Miembro Desde 25/10/13

4,083 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 4

Últimos 7 Días: 28

Últimos 30 Días: 133

Todo El Tiempo: 31,487