Saltar al contenido principal
  1. Remove the two 1.6 mm Phillips #000 screws securing the metal battery connector bracket to the logic board.
    • Remove the two 1.6 mm Phillips #000 screws securing the metal battery connector bracket to the logic board.

    The battery steps really are NOT required to perform the camera removal......I skipped them completely.

    Melissa - Contestar

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Remove the metal battery connector bracket from the iPhone.
    • Remove the metal battery connector bracket from the iPhone.

  4. Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board. Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.
    • Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board.

    • Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

    Need a picture of the socket, after the battery cable has been lifted so we can see what it's supposed to look like.

    TerribleHacker - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Sam Goldheart

Miembro Desde 18/10/12

374,423 Reputación

541 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

98 Miembros

8,963 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 9

Todo El Tiempo: 3,808