Saltar al contenido principal

iPhone 4S Upper Antenna Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iPhone 4S Upper Antenna Replacement, Upper Antenna: paso 1, imagen 1 de 1
    • Remove the 2.4 mm Phillips screw next to the headphone jack.

  2. iPhone 4S Upper Antenna Replacement: paso 2, imagen 1 de 2 iPhone 4S Upper Antenna Replacement: paso 2, imagen 2 de 2
    • Use the edge of a plastic opening tool to peel the upper antenna off the headphone jack.

    • Use a pair of tweezers to remove the upper antenna from the iPhone.

    • Before reassembly, be sure to clean the metal-to-metal contact point on the upper antenna (not the mating halves of its connector) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 506