Saltar al contenido principal

Introducción

How to remove the SIM card from the 1st Generation iPhone.

Partes

  1. Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.
    • Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.

    • Press down on the paper clip until the SIM card tray pops out.

  2. Grasp the SIM card tray and slide it out of the iPhone.
    • Grasp the SIM card tray and slide it out of the iPhone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

40 personas más completaron esta guía.

iRobot

Miembro Desde 24/09/09

1 Reputación

646 Guías creadas

6 comentarios

thats what i did too. but it froze..

i dont know what to do..

Marie - Contestar

Can't access

hope -

Try with a little strap cut out from a radiology exam sheet. Put it inside the sim tray and try to open again. It works.

Henri Salvat - Contestar

Does anyone know where I can get a SIM tray and card for the 1st get iPhone model A1203?

TIA

J R Rosen - Contestar

Did you ever find an answer for this? I was given a 1st gen iPhone A1203 and it doesn't have a sim card. Thanks.

Alex Omar - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 39

Ultimos 30 días: 141

Todo El Tiempo: 80,504