Saltar al contenido principal

Introducción

prereq only guide for replacing a screen and digitizer, or home button.

  1. iPad mini 4 LTE Display Assembly Replacement, Display Assembly: paso 1, imagen 1 de 3 iPad mini 4 LTE Display Assembly Replacement, Display Assembly: paso 1, imagen 2 de 3 iPad mini 4 LTE Display Assembly Replacement, Display Assembly: paso 1, imagen 3 de 3
    • Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.

    • Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.

    • When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.

  2. iPad mini 4 LTE Display Assembly Replacement: paso 2, imagen 1 de 1
    • Remove the display assembly.

    • To reinstall your display assembly, you will need to replace the display adhesive. Use our display adhesive application guide to reapply your display adhesive and reseal your device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Miembro Desde 05/02/15

217,248 Reputación

177 Guías creadas

Equipo

The Home Depot Miembro de The Home Depot

Community

10,598 Miembros

1,028 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 15

Todo El Tiempo: 284