Saltar al contenido principal

Introducción

Prerequisite only guide. Shows how to disconnect the battery for the iPad Pro 9.7".

  1. Use a Phillips screwdriver to remove the eleven 1.3 mm screws securing the EMI shield.
    • Use a Phillips screwdriver to remove the eleven 1.3 mm screws securing the EMI shield.

  2. Apply a heated iOpener to the EMI shield on the logic board for one minute.
    • Apply a heated iOpener to the EMI shield on the logic board for one minute.

  3. Lift the logic board EMI shield, starting at the edge nearest the top of the iPad. Slowly peel the EMI shield up from the logic board. This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.
    • Lift the logic board EMI shield, starting at the edge nearest the top of the iPad.

    • Slowly peel the EMI shield up from the logic board.

    • This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.

    • Remove the logic board EMI shield.

  4. Use a Phillips driver to remove the 1.7 mm-long screw securing the battery connector.
    • Use a Phillips driver to remove the 1.7 mm-long screw securing the battery connector.

  5. If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield. Squeeze the sharp protrusion with a pair of pliers to flatten it. Repeat the process for all sharp protrusions along the edges of the EMI shield.
    • If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield.

    • Squeeze the sharp protrusion with a pair of pliers to flatten it.

    • Repeat the process for all sharp protrusions along the edges of the EMI shield.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Miembro Desde 03/01/18

167,097 Reputación

411 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

136 Miembros

16,675 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 16

Todo El Tiempo: 97