Saltar al contenido principal

iPad Mini Wi-Fi Logic Board Assembly Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iPad Mini Wi-Fi Logic Board Assembly Replacement, Logic Board Assembly: paso 1, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement, Logic Board Assembly: paso 1, imagen 2 de 2
    • Use tweezers to peel up and remove the small piece of tape covering the front-facing camera cable connector.

  2. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 2, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 2, imagen 2 de 2
    • The front-facing camera cable connector is secured with pieces of tape that wrap up around the sides of the cable and are fastened to two small metal plates.

    • Use a plastic opening tool to gently pry the lower metal plate up from the front-facing camera cable connector.

    • Being careful not to break the plate or the tape attached to it, pry it up and fold it away from the front-facing camera cable connector.

  3. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 3, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 3, imagen 2 de 2
    • Gently pry the second (upper) metal plate up from the front-facing camera cable connector.

    • Again, carefully pry the plate up and away from the front-facing camera cable connector.

  4. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 4, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 4, imagen 2 de 2
    • Use a plastic opening tool to pry the front-facing camera cable's connector up from its socket on the logic board.

  5. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 5, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 5, imagen 2 de 2
    • Gently fold the front-facing camera cable up and out of the way of the logic board.

  6. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 6, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 6, imagen 2 de 2
    • Use tweezers to peel up and remove the small piece of tape covering the headphone jack cable connector.

  7. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 7, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 7, imagen 2 de 2
    • Use a plastic opening tool to gently pry the lower metal plate up from the headphone jack cable connector.

    • Being careful not to break the plate or the tape attached to it, pry it up and fold it away from the headphone jack cable connector.

  8. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 8, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 8, imagen 2 de 2
    • Pry the second (upper) metal plate up from the front-facing camera cable connector.

    • Again, carefully pry the plate up and away from the headphone jack cable connector.

  9. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 9, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 9, imagen 2 de 2
    • Use a plastic opening tool to pry the headphone jack cable's connector up out of its socket on the logic board.

    • Gently bend the headphone jack cable back, away from the logic board.

  10. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 10, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 10, imagen 2 de 2
    • Use a plastic opening tool to pry the rear-facing camera cable up from its socket on the logic board.

  11. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 11, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 11, imagen 2 de 2
    • Use tweezers to peel up and remove the small piece of tape covering the button ribbon cable ZIF connector.

  12. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 12, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 12, imagen 2 de 2
    • Use the tip of a spudger to lift up the tab on the button ribbon cable ZIF connector.

  13. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 13, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 13, imagen 2 de 2
    • Use tweezers to pull the button ribbon cable straight out of its ZIF socket on the logic board.

  14. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 14, imagen 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 14, imagen 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 14, imagen 3 de 3
    • Gently peel back the wide piece of tape covering the top of the right speaker.

  15. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 15, imagen 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 15, imagen 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 15, imagen 3 de 3
    • Continue peeling the tape, and remove it from the iPad.

  16. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 16, imagen 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 16, imagen 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 16, imagen 3 de 3
    • Use the flat end of a spudger to disconnect the two bottom antenna cable connectors from their sockets on the logic board.

  17. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 17, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 17, imagen 2 de 2
    • Use the tip of a spudger to peel back the small piece of tape covering both antenna cables on the bottom right side of the iPad.

    • Leave the lower part of the tape stuck to the back of the rear case to aid in reassembly.

  18. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 18, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 18, imagen 2 de 2
    • With the tip of a spudger, peel up the larger piece of tape covering both antenna cables near the bottom of the rear case.

    • Do not try to remove this piece of tape; it is wrapped around the top antenna cable.

  19. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 19, imagen 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 19, imagen 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 19, imagen 3 de 3
    • Use the tip of a spudger to pry the small metal retaining clip off the left antenna cable, then de-route the cable from the clip.

  20. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 20, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 20, imagen 2 de 2
    • De-route the antenna cable from the corner of the iPad.

  21. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 21, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 21, imagen 2 de 2
    • Use the tip of a spudger to remove the small piece of tape securing the antenna cable in the bottom right corner of the iPad.

  22. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 22, imagen 1 de 1
    • Peel the cable back from the corner of the iPad.

  23. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 23, imagen 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 23, imagen 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 23, imagen 3 de 3
    • Use the tip of a spudger to pry the antenna cable tape up from the rear case of the iPad.

    • Gently pull the antenna cable out of the way as you work along the piece of tape, to keep it from resealing.

  24. iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 24, imagen 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: paso 24, imagen 2 de 2
    • Pull the antenna cable from the slot behind the Lightning connector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Miembro Desde 10/17/09

502,275 Reputación

407 Guías creadas

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,559 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 45