Saltar al contenido principal

iPad Mini CDMA GPS Antenna Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iPad Mini CDMA GPS Antenna Replacement, GPS Antenna: paso 1, imagen 1 de 1
    • Remove the following screws securing the GPS antenna to the rear case:

    • One 2.5 mm Phillips #00

    • Two 1.1 mm Phillips #00

    • One 1.2 mm Phillips #00

  2. iPad Mini CDMA GPS Antenna Replacement: paso 2, imagen 1 de 3 iPad Mini CDMA GPS Antenna Replacement: paso 2, imagen 2 de 3 iPad Mini CDMA GPS Antenna Replacement: paso 2, imagen 3 de 3
    • Use the flat end of a spudger to loosen the foam adhesive holding the GPS antenna to the right speaker.

  3. iPad Mini CDMA GPS Antenna Replacement: paso 3, imagen 1 de 2 iPad Mini CDMA GPS Antenna Replacement: paso 3, imagen 2 de 2
    • Gently de-route the antenna cable from the bottom right corner of the rear case.

    • Move the antenna out of the way of the right speaker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 59