Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

iPad 3 Wi-Fi Front Panel Assembly Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iPad 3 Wi-Fi Front Panel Assembly Replacement, Front Panel Assembly: paso 1, imagen 1 de 1
    • Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

  2. iPad 3 Wi-Fi Front Panel Assembly Replacement: paso 2, imagen 1 de 3 iPad 3 Wi-Fi Front Panel Assembly Replacement: paso 2, imagen 2 de 3 iPad 3 Wi-Fi Front Panel Assembly Replacement: paso 2, imagen 3 de 3
    • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

    • Rotate the LCD along its left edge and lay it down on top of the front panel.

    • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 116