Reemplazo del cable plano de la placa SIM del iPad 3 4G

Introducción

Prerrequisito interno

Qué necesitas

Paso 1 Cable plano de la placa SIM

Reemplazo del cable plano de la placa SIM del iPad 3 4G, Cable plano de la placa SIM: paso 1, imagen 1 de 3

Reemplazo del cable plano de la placa SIM del iPad 3 4G, Cable plano de la placa SIM: paso 1, imagen 2 de 3

Reemplazo del cable plano de la placa SIM del iPad 3 4G, Cable plano de la placa SIM: paso 1, imagen 3 de 3

Despega y retira el trozo de cinta que cubre el conector ZIF del cable de la tarjeta SIM.
Levanta la tapa de retención del conector ZIF del cable de la tarjeta SIM.
Con la punta de un spudger, saca el cable de la tarjeta SIM de su zócalo en la placa lógica.

Traducir

I found it easier to remove the 7 screws first in step 42 then gently pull the logic board towards you freeing the SIM board cable.

Rich1981 - 11 de ene. de 2018 Contestar

This cable is really fragile, I found it easier to flip the retaining flap then remove all 7 screws in step 42 then gently pull the logic board toward you freeing the SIM board cable.

Rich1981 - 11 de ene. de 2018 Contestar

For me, it was impossible to accomplish this step without first removing the 7 screws from the Logic Board and disconnecting the Logic Board connectors (Wi-Fi, Speaker, Dock/Lightning) at the bottom. Then, I could slide the Logic Board downward just enough to pull free the SIM cable. When reassembling, I attached the 3 antenna connectors first, then the SIM cable, before installing the 7 screws and Logic Board connectors (Wi-Fi, Speaker, Dock/Lightning) at the bottom. Went a bit easier.

robk64 - 3 de mar. de 2019 Contestar

Thanks for your advice! Definitely best doing it during step 43!

coccia.stefano - 19 de abr. de 2020 Contestar