Saltar al contenido principal

Introducción

Internal Prerequisite

Partes

No se especificaron partes.

  1. Remove the seven screws securing the logic board to the rear aluminum panel.
    • Remove the seven screws securing the logic board to the rear aluminum panel.

    • Six 2.1mm Phillips #00

    • One 2.5mm Phillips #00

  2. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Flip the logic board over, minding any cables that may get caught.
    • Flip the logic board over, minding any cables that may get caught.

    • Using the tip of a spudger, remove the three antenna connectors from their sockets on the logic board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

Miembro Desde 12/04/10

113,283 Reputación

143 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

100 Miembros

9,029 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 42