Saltar al contenido principal

Introducción

Pre-req for antennas

Partes

No se especificaron partes.

  1. Carefully lay the LCD next to the rear panel. Use a plastic opening tool to lift the display data cable lock upwards. Pull the display data cable out of its socket.
    • Carefully lay the LCD next to the rear panel.

    • Use a plastic opening tool to lift the display data cable lock upwards.

    • Pull the display data cable out of its socket.

    • Do not pull the connector upward as you disconnect it from its socket.

  2. Remove the LCD assembly from the rear panel assembly.
    • Remove the LCD assembly from the rear panel assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jake Devincenzi

Miembro Desde 18/04/11

114,440 Reputación

57 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 503