Saltar al contenido principal

iMac Intel 27" EMC 2546 Power Supply Cable Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iMac Intel 27" EMC 2546 Power Supply Cable Replacement, Power Supply Cable: paso 1, imagen 1 de 2 iMac Intel 27" EMC 2546 Power Supply Cable Replacement, Power Supply Cable: paso 1, imagen 2 de 2
    • Remove the power supply cable from its connector by pulling it parallel to the logic board.

    • During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,576 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 78