Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Internal Prerequisite.

  1. Disconnect the SATA data and power cables by pulling their connectors away from the hard drive. Disconnect the SATA data and power cables by pulling their connectors away from the hard drive.
    • Disconnect the SATA data and power cables by pulling their connectors away from the hard drive.

  2. Disconnect the hard drive thermal sensor cable from the thermal sensor attached to the side of the hard drive.
    • Disconnect the hard drive thermal sensor cable from the thermal sensor attached to the side of the hard drive.

  3. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  4. Compress the plastic hard drive retainer by pushing it toward the bottom edge of the iMac. Pull the top edge of the hard drive slightly away from the rear case.
    • Compress the plastic hard drive retainer by pushing it toward the bottom edge of the iMac.

    • Pull the top edge of the hard drive slightly away from the rear case.

  5. Lift the hard drive off its bottom retaining posts and remove it from the iMac.
    • Lift the hard drive off its bottom retaining posts and remove it from the iMac.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 257