Saltar al contenido principal

Introducción

Prereq-only guide for removing the lower support bracket in an iMac.

Partes

No se especificaron partes.

  1. Remove the following five Phillips  screws holding the lower support bracket in place: Four 3.2 mm screws
    • Remove the following five Phillips screws holding the lower support bracket in place:

    • Four 3.2 mm screws

    • One 1.7 mm screw

    • On at least some EMC 2544 machines, all five screws are the same size.

    • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

  2. Remove the lower support bracket from the iMac enclosure.
    • Remove the lower support bracket from the iMac enclosure.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Miembro Desde 05/02/15

206,444 Reputación

178 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

137 Miembros

16,041 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 96