Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Prerequisite only.

Partes

No se especificaron partes.

  1. Gently pull the fan cable connector straight out of its socket on the logic board. Gently pull the fan cable connector straight out of its socket on the logic board.
    • Gently pull the fan cable connector straight out of its socket on the logic board.

  2. Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.
    • Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.

    • The uppermost screw has a rubber standoff adhered to its head to support the display—leave this in place.

  3. Remove the fan from the iMac. Remove the fan from the iMac.
    • Remove the fan from the iMac.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Miembro Desde 05/02/15

203,432 Reputación

178 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

135 Miembros

14,475 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 62