Saltar al contenido principal

iMac Intel 21.5" EMC 3068 Display Assembly Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iMac Intel 21.5" EMC 3068 Display Assembly Replacement, Display Assembly Separation: paso 1, imagen 1 de 2 iMac Intel 21.5" EMC 3068 Display Assembly Replacement, Display Assembly Separation: paso 1, imagen 2 de 2
    • Lift the display up to a near-vertical position.

    • At this point there is still a strip of adhesive along the bottom of the display that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.

  2. iMac Intel 21.5" EMC 3068 Display Assembly Replacement: paso 2, imagen 1 de 2 iMac Intel 21.5" EMC 3068 Display Assembly Replacement: paso 2, imagen 2 de 2
    • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

  3. iMac Intel 21.5" EMC 3068 Display Assembly Replacement: paso 3, imagen 1 de 3 iMac Intel 21.5" EMC 3068 Display Assembly Replacement: paso 3, imagen 2 de 3 iMac Intel 21.5" EMC 3068 Display Assembly Replacement: paso 3, imagen 3 de 3
    • Lift the display up from the frame and remove it from the iMac.

    • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

    • Be very careful handling the display—it's big, heavy, and made of glass.

    • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Miembro Desde 04/11/15

196,143 Reputación

416 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 77