Saltar al contenido principal

iMac Intel 21.5" EMC 2805 Fan Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iMac Intel 21.5" EMC 2805 Fan Replacement, Fan: paso 1, imagen 1 de 2 iMac Intel 21.5" EMC 2805 Fan Replacement, Fan: paso 1, imagen 2 de 2
    • Use the tip of a spudger to push the fan cable connector out of its socket on the logic board.

    • It is recommended to carefully push on both sides of the connector to walk it out of its socket.

  2. iMac Intel 21.5" EMC 2805 Fan Replacement: paso 2, imagen 1 de 1
    • Remove the following screws securing the fan to the rear enclosure:

    • Two 12.5 mm T10 screws

    • One 9.9 mm T10 screw

  3. iMac Intel 21.5" EMC 2805 Fan Replacement: paso 3, imagen 1 de 2 iMac Intel 21.5" EMC 2805 Fan Replacement: paso 3, imagen 2 de 2
    • Lift and remove the fan from the iMac.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 36