Saltar al contenido principal

Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638

Qué necesitas

  1. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638, Montaje de la pantalla: paso 1, imagen 1 de 1
    • Con la bisagra libre para moverse, el iMac estará desequilibrado y será difícil de trabajar. Las reparaciones son rápidas y fáciles con una cuña iMac, pero se pueden completar sin una.

    • Si estás usando la cuña de servicio iFixit, sigue estas instrucciones de ensamble para armarlo.

    • Antes de comenzar el trabajo en su iMac: Desenchufe la computadora y mantenga presionado el botón de encendido durante diez segundos para vaciar los condensadores de alimentación de energía.

    • Sea muy cuidadoso de no tocar los cables del condensador ni las juntas de soldadura expuestas en la parte posterior de la fuente de alimentación. Solo toque la tabla por los bordes.

    The wedge is an extremely tight fit for this model. I was worried that the amount of force needed to use it as shown might damage the stand, so I used it with the long side down instead. It worked fine that way and didn’t need anywhere near as much force to insert.

    roberttrevellyan - Contestar

    Here are a couple tips from me:

    1) Expose the adhesive to extreme temperatures. I did this by transporting my iMac in my car, screen-down on a piece of cardboard on a cold February morning (in Chicago). When I went to pick up the iMac, the screen practically fell off the chassis. I would have been distraught by this if I hadn’t already planned this replacement. So it was a happy accident.

    2) Remember to expell the residual power from the power supply by pushing the power button while the iMac is unplugged. This does NOT guarantee it’s safe to touch, but when I accidentally brushed the solder and exposed capacitors, I didn’t get shocked.

    jerrid_foiles - Contestar

    Instead of using the wedge, I placed the iMac faced up with the top side (web cam) facing me while I ran the pizza roller around. It worked out great!

    Sam Fung - Contestar

    “All iMacs also come with a traditional hard drive” mine doesn’t!! it’s HDD bay is completely empty, no SATA cable or anything. I guess I’ll have to upgrade the PCIe SSD instead.

    Chris Hughes - Contestar

    There is no replacement glass for this model, it is part of the LCD and impossible to remove or replace- the entire LCD has to be replaced unfortunately if the glass is cracked or damaged. You will have to Google search for a replacement. Also be careful with some of the lock tight tork screws as I broke one of my screw mounts taking one out.

    Phil Tesone - Contestar

    I used this service wedge but also found it a very tight fit. The same stabilization can be achieved by using a big rolled up towel.

    Ernst - Contestar

    While this is a good instruction guide, I recommend to also look at OWC’s instruction video about drive installation, before starting the exercise. Those install videos are very detailed and useful.

    Ernst - Contestar

    Main advice: TAKE YOUR TIME with the pizza roller.

    Make several passes, until you really feel like there's no more sticker in the way. Stay away from the camera though (approx. 1inch / 2.5cm on both sides). This will reduce the work left with the plastic card. Adhesive is really on the edge of the screen so there is absolutely no need to go any further than the recommended 1cm / 3/8inch depth.

    Where are the sensitive parts?

    Facing your iMac, imagine you're looking at a watch. There are antennas on 1, 2 and 4 o'clock. Do not insert any metal piece there (nor anywhere else, btw). Other than that AND the screen cables underneath the camera, not much danger.

    Froggy Manny - Contestar

  2. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 2, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 2, imagen 2 de 2
    • Comenzando a la izquierda de la pantalla, cerca del botón de encendido, inserte la herramienta de apertura iMac en el espacio entre el panel de vidrio y la carcasa trasera.

    • El centro de la herramienta de apertura iMac evitará que empuje demasiado la rueda. Si usa una herramienta diferente, inserte no más de 3/8 "en la pantalla. De lo contrario, corre el riesgo de cortar los cables de la antena y causar daños graves.

    Don’t get too worried about starting exactly where the picture says. The glue is stronger in some parts so just start wherever is easier and then work slowly and patiently around in the direction shown.

    Richard Cook - Contestar

    As this guide doesn’t cover replacing the adhesive strips, I found referring to the following was useful (noting that it’s not for the same model of iMac, so the modification they mention wasn’t necessary): Reemplazo de tiras adhesivas de la pantalla de iMac Intel 21.5"

    Alan Digby - Contestar

    It is very easy to crack the glass in front of the LCD during this step. I used the guitar pick, maybe it was too thick… crack is just on the frame but anyway it is disappointing :(

    Nikolay - Contestar

    This part of the exercise should be done with extreme patience. I took my sweet time with the opening tool, rolling it through the entire panel and enclosure gap over and over again, until I was very sure no parts were sticking together anymore. And when I thought I was I done, I decided to do it over again.

    Ernst - Contestar

    You can "warm up" the adhesive before try to cut it with the tool using a hair dryer. Heat the edges for about a minute, keep moving it so you don't cause stress in the glass. Also the above note.. use the tool and then the cards. Do not use a guitar pick or other objects as the thickness will cause you to break the front glass, which is a bonded part of the display (expensive).

    Carl Schultz - Contestar

    Merci pour ce conseil

    bry nicolas -

  3. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 3, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 3, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 3, imagen 3 de 3
    • Use la herramienta parecido a un cortador de pizza: gírelo a lo largo de la abertura para cortar el adhesivo de espuma por el centro.

    • Asegúrese de empujar siempre con la manija detrás de la rueda de corte. Si tira, la rueda podría salirse del mango.

    • Mueva la herramienta hacia arriba a lo largo del lado izquierdo de la pantalla.

    Erreur de traduction: "de bas en haut" et non de" haut en bas" sur le côté gauche de l'écran

    Moreau - Contestar

    If re-opening a screen that was opened and re-attached using iFixit’s adhesive strips, I would strongly recommend heating it first with an iOpener, heat gun or hair dryer. 20 minutes after attaching with the iFixit adhesive I tried to open it again with the pizza slicer to fix something and cracked the screen on the left-hand side.

    plasticpool - Contestar

  4. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 4, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 4, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 4, imagen 3 de 3
    • Siga moviendo la herramienta hacia arriba alrededor de la esquina superior izquierda

    Ne pincez pas l’écran avec l’autre main. Vous exercez une pression inutile sur le verre et empêchez la roulette de couper le joint.

    phfoglia - Contestar

  5. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 5, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 5, imagen 2 de 2
    • Corte el adhesivo a lo largo de la esquina superior izquierda de la pantalla.

  6. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 6, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 6, imagen 2 de 2
    • Continúa por la parte superior de la pantalla.

    • Es posible que desee mover la herramienta hacia adelante y hacia atrás a través de lo que ya ha cortado varias veces, para asegurarse de retirar la mayor cantidad de adhesivo como sea posible.

    In this step can I cut along the display without make any damage to the front camera?

    arisnordico - Contestar

    Hi! Actually - there is no need to cut the tape around the camera area - there is no tape to cut at all! And so, the way go is easy - just pass 10 mm to the left and to the right from camera and start cutting!

    P.S. Just did the whole procedure to replace a RAM and to add SSD on PSIe an hour ago! Seems to be different reading the instructions... you know - 2/10 and so on. But it's really not that hard, trust me. I'll give it 5/10.

    P.P.S. By the way there is one trick to pass the difficult steps. Any action which requires pulling smth (motherboard, speaker, power supply unit) from the narrow crack (or should i say - slit?) at the bottom of your Imac is really not so easy.

    And the trick is to first remove a thin metal stripe with some kind of insulation on it which held by 5 small (very small!!) screws at the bottom of your Imac. After you done it - it's easy to pull everything! Pay attention to the fact that one of this 5 screws at the center are more shortly than others.

    dv1977 - Contestar

    I did all steps like this manuell but now the Display wont work only some colered strips are to see! Whats happend??

    Can anybody help me ? Maybe the connector cable is broken?

    djfanta - Contestar

    Check both connectors, probably one of them not seated well

    pzhivulin -

    You can add a SATA SSD if you already have a PCIe SSD Factory?

    kaserlik - Contestar

    If you're changing cracked EMC 2638 display to new assembly, there's two more steps:

    Step 24: Use the tip of a spudger to flip up the metal retaining bracket on the display data cable.

    Carefully pull the display data cable from its socket on the display assembly.

    Step 25: Use the tip of a spudger to unplug bracket of the thermal sensor small cable near display data cable.

    Carefully remove scotch tape covering thermal sensor. Using iSesamo or flat tip of the spudger carefully peel the thermal sensor away.

    pzhivulin - Contestar

    omg - forgot to switch the termal sensor from the old display...

    now fan runs like crazy...

    Andrei Balotescu -

    The key thing is to never put any force on the opening tool when working through the tape. Just roll it back and forth with ease.

    Ernst - Contestar

  7. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 7, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 7, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 7, imagen 3 de 3
    • Empuje la herramienta alrededor de la esquina superior derecha de la pantalla.

  8. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 8, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 8, imagen 2 de 2
    • Mueva la herramienta hacia abajo a lo largo del lado derecho de la pantalla.

  9. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 9, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 9, imagen 2 de 2
    • Finalice empujando la herramienta de apertura hacia la parte inferior del lado derecho de la pantalla.

    • En este punto, se recomienda volver a pasar la herramienta en toda la pantalla para asegurarse de cortar la mayor cantidad de adhesivo posible.

    Yes, do it many times to loosen the adhesive.

    Noah Ralston - Contestar

    Would be good data to show the 3 areas (wifi antennas where the "tape" is larger and covers them. The rest of the "tape" is 1.4" and easy. Also after removing the display, be sure to remove the old "tape" from both the display and the rubber parts of the case. Use the spudger to start an end and it should pull off easily. Careful on the baackside of the display as you can scratch off the black paint/covering.

    Carl Schultz - Contestar

  10. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 10, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 10, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 10, imagen 3 de 3
    • Mientras que la herramienta de apertura corta la mayor parte del adhesivo, la pantalla aún estará ligeramente adherida a la caja. Se necesitará una tarjeta de plástico para liberar el último adhesivo.

    • Coloque el iMac boca arriba en una mesa.

    • Comenzando desde la esquina superior derecha del iMac, coloque una tarjeta de plástico entre la pantalla y el marco.

    • Tenga cuidado de NO insertar la tarjeta de plástico más de 3/8 ", o puede dañar los componentes internos.

    this step is extremely important NOT to stick in the cards too far….. doing so, you risk a 600 euro replacement as I experienced………

    Edgar Broekema - Contestar

    I drew a 3/8” line on my cards with a marker first.

    Max Romano - Contestar

    I’m reading this on the EU store, please change all measurements to cm/mm.

    Morgana Devina - Contestar

    @ifixit The next batch of cards you create should have a line printed on the card 3/8” in from the edges. Would make a nice reference.

    Richard Giratd - Contestar

    Here’s where OWC provides glass removal suction cups, which is a better solution than plastic cards.

    The suction cups help to easily lift the glass panel, without risking the damaging of any internal wiring that the plastic cards could cause.

    Ernst - Contestar

    Better to remove stand wedge at this point? Can’t see from pics

    derekrobinson - Contestar

  11. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 11, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 11, imagen 2 de 2
    • Gire suavemente la tarjeta de plástico hacia los lados para crear un espacio entre la pantalla y el marco.

    • Muévase despacio y tenga cuidado de no estresar demasiado el cristal de la pantalla; solo necesita hacer un espacio de aproximadamente 1/4 ".

    This part must be done very carefully or you can damage the flat cable from display, despite it was under a iron cover.

    Cassio Machado - Contestar

  12. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 12, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 12, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 12, imagen 3 de 3
    • Deslice la tarjeta hacia el centro de la pantalla para cortar el resto del adhesivo a lo largo de la esquina superior derecha del iMac.

    • Asegúrese de detenerse antes de la cámara iSight, o puede dañarla.

    You don't need to do it like this, simply open the iMac bendidng the LCD completely and use the pizza cutter to remove the adhesive.

    Felix - Contestar

    Using glass removal suction cups will avoid running this risk of damaging the camera (or any wiring).

    Ernst - Contestar

  13. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 13, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 13, imagen 2 de 2
    • Vuelva a acuñar la tarjeta de plástico en la esquina superior derecha y déjela allí para evitar que el adhesivo se mueva.

  14. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 14, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 14, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 14, imagen 3 de 3
    • Inserta una segunda tarjeta de plástico en el espacio entre la pantalla y el marco cerca de la esquina superior izquierda del iMac.

  15. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 15, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 15, imagen 2 de 2
    • Gire suavemente la tarjeta hacia arriba, aumentando ligeramente el espacio entre la pantalla y el marco.

    • Al igual que con el otro lado, gírelo lentamente para permitir que el tiempo del adhesivo se separe, y tenga cuidado de no sobre tensar el vidrio de la pantalla.

  16. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 16, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 16, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 16, imagen 3 de 3
    • Deslice la tarjeta de plástico hacia el centro, deteniéndose de nuevo justo antes de la cámara iSight.

  17. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 17, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 17, imagen 2 de 2
    • Cuña la tarjeta de plástico en la esquina superior izquierda.

  18. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 18, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 18, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 18, imagen 3 de 3
    • Con ambas tarjetas de plástico insertadas como se muestra cerca de las esquinas, gire suavemente las tarjetas hacia los lados para aumentar el espacio entre la pantalla y la carcasa.

    • Si hay secciones que parecen adherirse y no se separan, deje de girar y use una de las tarjetas para cortar el adhesivo restante.

    • Comience a levantar la parte superior de la pantalla desde el marco.

    • Solo levante la pantalla unas pulgadas: los datos de la pantalla y los cables de alimentación todavía están conectados a la placa lógica.

  19. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638, Pantalla: paso 19, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638, Pantalla: paso 19, imagen 2 de 2
    • Mientras sostienes la pantalla con una mano, usa la otra para desconectar el cable de energía de la pantalla.

    • Levanta la pantalla lo suficiente para tener un acceso fácil al conector, pero no demasiado ya que puedes estirar los cables y estresar sus conexiones (aproximadamente 8" (20 cm)).

    Pulling the display power cable by the wires makes me nervous..

    bstaud - Contestar

    I had a small flight light ready so I could see. Follow the directions - don’t blindly pull.

    Noah Ralston - Contestar

    Head lamp gives you the best hands free view!

    Macrepair SF - Contestar

    bstaud - The display power cable has two squeezable levers on each end of the cable’s width.

    Squeeze the left lever with your thumb while you simultaneously squeeze the right lever with your

    index finger, and gently pull the cable straight back and out, and the cable comes out very easily.

    Ted Horodynsky - Contestar

    When reassembling, make sure you get a “click” confirmation that both the levers have locked AND the pins have seated on this connector. I was treated to a black screen upon startup, and had to re-cut my newly installed adhesive strips to get back in to firm up this connection. Better would be power up with the bottom adhesive in place, screen resting in place and held on top with blue painter tape to confirm connections, THEN pull off screen-side adhesive tape covers for final re-bonding.

    Robert McKillip - Contestar

    Can someone post a link to actually purchase these cables?

    Jay Hernandez - Contestar

    E-bay had one for me

    Roger - Contestar

  20. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 20, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 20, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 20, imagen 3 de 3
    • Usa la punta de un spudger para voltear hacia arriba el soporte de retención metálico en el cable de datos de la pantalla.

    • Con cuidado tira del cable de datos de la pantalla de su zócalo en la placa lógica.

    • Asegúrate de tirar de forma recta el cable de datos de la pantalla fuera de su zócalo.

    Sure could use a magnified picture of this connector and socket, especially the first time you go in. And it is the most critical step of the whole operation — bung it up and we’re toast.

    bstaud - Contestar

    Hi bstaud! If you hover over the image you can click on the magnifying glass and get a large image of any guide photo. Hope that helps!

    Sam Goldheart -

    To clarify, the connector pulls out in the plane of the logic card, not perpendicular.

    David Thompson - Contestar

  21. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 21, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 21, imagen 2 de 2
    • Levanta la pantalla hasta una posición casi vertical.

    • En este punto aún hay una tira adhesiva a lo largo de la parte inferior de la pantalla, que mantendrá la pantalla al marco como si fuera una bisagra. Puedes aflojar este adhesivo subiendo y bajando la pantalla un par de veces.

    Where can I find a replacement display for my iMac?

    Braydon Boyce - Contestar

    iFixit has listings for replacements. Go to the Parts section

    jerrid_foiles -

  22. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 22, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 22, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 22, imagen 3 de 3
    • Ten mucho cuidado de no tocar los cables del condensador o cualquier unión de soldadura expuesta en la parte posterior de la fuente de alimentación (encuadrada en rojo).

    • Toma la lengüeta pequeña al final de una de las tiras adhesivas de la pantalla del borde inferior y tira del adhesivo hacia la parte superior del iMac para quitarlo.

    • Repite este paso con la otra tira adhesiva y retírala.

    • Si cualquiera de las tiras adhesivas se rompe antes de quitarla, usa una tarjeta de plástico para cortar el adhesivo restante.

    Cutting through this extra adhesive on the bottom took a bit more effort than the step and picture implied (to me). Unlike the other edges, here don't be afraid to really push the card in there to break the seal, there's nothing behind that adhesive that is breakable.

    phil - Contestar

    cutting through the adhesive is unnecessary if it's not been opened before (outside of an apple store) there will be a tab at the end of each VHB strip that you can use to simply pull the vhb strips off.

    Rory McKenna - Contestar

    YES, exactly the same here. more but more simple.

    Lucio Alves -

    To save a few steps and a bit of time, if you have a helper, they can hold the display at a 90° angle while you unscrew the brackets and remove/replace the hard drive rather than remove the display entirely. Also reduces the likelihood of damaging the display as you remove and handle it.

    marty - Contestar

    The proper way to remove the display according to the Macintosh tech manual and videos is as Rory McKenna and Lucio Alves have learned is to pull the tab at the end of each VHB strip until it is off.

    Ben Varela - Contestar

    This worked great! look for small left over adhesive on either edge of the bottom of the screen and pull each one towards the center. Screen assembly removes after that with no fuss.

    Miguel Rivas -

    Would Nitrile Gloves help here to avoid getting shocked?

    Thomas Z. - Contestar

  23. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 23, imagen 1 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 23, imagen 2 de 3 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 23, imagen 3 de 3
    • Levanta la pantalla fuera del marco y quítala del iMac.

    • Puede ser necesario levantarla lentamente de un lado, para despegar el adhesivo remanente.

    • Ten mucho cuidado cuando lleves la pantalla; es grande, pesada, y está hecha de vidrio.

    • Durante el reensamblaje, diríjete a nuestra guía de adhesivos para pantallas para instalar el nuevo adhesivo.

  24. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638, Cable del micrófono y cámera iSight: paso 24, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638, Cable del micrófono y cámera iSight: paso 24, imagen 2 de 2
    • Utiliza la punta de un spudger para bajar el soporte metálico de sujeción del cable de la cámara iSight.

  25. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 25, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 25, imagen 2 de 2
    • Tira suavemente del cable de la cámara iSight hacia abajo desde su conector en la placa de la cámara.

    • Asegúrate de retirar sólo el conector iSight: el conector del micrófono está en una rama separada del cable.

  26. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 26, imagen 1 de 1
    • Desconecta el cable del micrófono de su conector en la placa de la cámara tirando con cuidado hacia abajo.

  27. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 27, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 27, imagen 2 de 2
    • Utiliza la punta de un spudger para levantar el soporte metálico de sujeción del cable de la cámara iSight situado en la placa lógica.

  28. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 28, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 28, imagen 2 de 2
    • Saca el cable de la cámara iSight de su conector en la placa lógica.

    • No emplees una fuerza excesiva. Se trata de un conector delicado que puede dañarse fácilmente.

  29. Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 29, imagen 1 de 2 Reemplazo del cable del micrófono y cámera iSight del iMac Intel 21.5" EMC 2638: paso 29, imagen 2 de 2
    • Despega y retira el cable de la cámara iSight de la carcasa trasera.

    • Si tienes problemas para despegar el cable del adhesivo que lo sujeta a la carcasa trasera, utiliza un spudger para hacer palanca y liberarlo.

Conclusión

Para volver a montar el dispositivo, sigue estas instrucciones en orden inverso.

3 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

100%

¡ Mariana Roca nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Sam Goldheart

Miembro Desde 10/18/12

465,326 Reputación

538 Guías creadas

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,580 Guías creadas

Un comentario

Excellently described procedure - it worked ok not disconnecting the AC power cable. Only item missed was to disconnect the right speaker - and then not to forget about keeping it out ready to connect when reinstating the mother board!

Thank you very much

Warren Burgess - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 19

Todo El Tiempo: 1,494