Saltar al contenido principal

Introducción

Prereq only for removing the logic board, fan and power supply are out.

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is attached by two cables, do not attempt to fully remove it from the iMac. The hard drive is attached by two cables, do not attempt to fully remove it from the iMac.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is attached by two cables, do not attempt to fully remove it from the iMac.

  2. Disconnect the SATA power cable. Disconnect the SATA power cable.
    • Disconnect the SATA power cable.

  3. Unplug the SATA data cable from the hard drive. Unplug the SATA data cable from the hard drive.
    • Unplug the SATA data cable from the hard drive.

  4. Remove the hard drive from the iMac.
    • Remove the hard drive from the iMac.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 77