Introducción
Replace a broken camera board to regain iSight functionality.
Qué necesitas
-
Herramienta utilizada en este paso:Heavy-Duty Suction Cups (Pair)$14.95
-
Stick a suction cup near each of the two top corners of the glass panel.
-
If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.
-
-
-
-
Remove the two 5.2 mm shouldered T10 Torx screws securing the camera board to the outer case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.