Saltar al contenido principal

iMac Intel 21.5" EMC 2308 Access Door Replacement

Qué necesitas

  1. iMac Intel 21.5" EMC 2308 Access Door Replacement, Access Door: paso 1, imagen 1 de 2 iMac Intel 21.5" EMC 2308 Access Door Replacement, Access Door: paso 1, imagen 2 de 2
    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

    In order for the logic board to come out cleanly, one should remove the RAM at the end of this step.

    kevmacmills - Contestar

    Definitely! The author should make this as a step in the description (because not everyone reads Comments)

    finnik2d - Contestar

    Just did this procedure and the RAM must absolutely come out for the logic board to come free later.

    matt - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 17

Todo El Tiempo: 9,518