Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

iMac Intel 20" EMC 2266 RAM Replacement

Qué necesitas

  1. iMac Intel 20" EMC 2266 RAM Replacement, Access Door: paso 1, imagen 1 de 1
    • Lay your iMac front side down on a table with the lower edge facing yourself.

    • Loosen the single Phillips screw in the center of the access door.

    • This screw is captive in the access door.

    • Remove the access door from your iMac.

  2. iMac Intel 20" EMC 2266 RAM Replacement, RAM: paso 2, imagen 1 de 2 iMac Intel 20" EMC 2266 RAM Replacement, RAM: paso 2, imagen 2 de 2
    • Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay.

    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

  3. iMac Intel 20" EMC 2266 RAM Replacement: paso 3, imagen 1 de 1
    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

Conclusión

To reassemble your device, follow these instructions in reverse order.

91 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 29

Todo El Tiempo: 37,646