Saltar al contenido principal

Introducción

Removing the first bottom plate will reveal the bottom housing, RAM, and airport card.

Partes

No se especificaron partes.

  1. Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.
    • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

  2. Loosen the four Phillips #0 screws.
    • Loosen the four Phillips #0 screws.

  3. Carefully remove the base access panel.
    • Carefully remove the base access panel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

David Hunter

Miembro Desde 05/10/11

524 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 21-22, Maness Fall 2011 Miembro de Cal Poly, Team 21-22, Maness Fall 2011

CPSU-MANESS-F11S21G22

4 Miembros

13 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 15

Todo El Tiempo: 2,345