Saltar al contenido principal

Introducción

Upgrade your RAM DIMM Module for more memory.

Partes

No se especificaron partes.

  1. Place the computer monitor face down on a safe, harmless surface. Using a  Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.
    • Place the computer monitor face down on a safe, harmless surface.

    • Using a Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Remove the metal plate from bottom of the iMac G4.
    • Remove the metal plate from bottom of the iMac G4.

    • The four screws do not completely separate from the metal plate.

  4. Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM. These tabs lock the module in place and releasing them will cause the module to "pop" up.
    • Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM.

    • These tabs lock the module in place and releasing them will cause the module to "pop" up.

    • Remove the RAM module from the iMac.

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Ryan Kozak

Miembro Desde 10/10/11

1,235 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 5-32, Amido Fall 2011 Miembro de Cal Poly, Team 5-32, Amido Fall 2011

CPSU-AMIDO-F11S5G32

4 Miembros

8 Guías creadas

Please correct the title, this is a 144 pin SODIMM, it is not a DIMM

The 168 pin DIMM is used in the internal socket.

Canadaram - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 13

Todo El Tiempo: 4,664