Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
The iMac G3. This was a great computer for the time, and had plenty of features.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Start by flipping the iMac upside-down. It may help to lay it on a towel, so you don't damage the screen, or scratch the face.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove this Phillips screw.
-
Using a flathead screwdriver, work your way around the bottom cover, until it comes off.
-
Then, lift the bottom cover up and out, and set it aside.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now, remove the DB-15 Video connector from the logic board.
-
It may be helpful to use a Phillips screwdriver to remove the thumbscrews.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the power cable from the logic board assembly.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the front panel connector. (You may also need to remove an additional screw that connects the front panel connector to the logic board assembly).
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now, remove these Phillips screws.
-
Now, grab the logic board assembly by the piece of plastic, and lift it out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The logic board assembly. This is the heart of the computer, it contains the motherboard, CPU, RAM, V-RAM, PRAM battery, the hard drive, and the optical drive.
-
Cancelar: No complete esta guía.
11 personas más completaron esta guía.
Un comentario
Just did this on my Grape 333 Mhz and on my Lime 333 Mhz which come from from the same place. Actually, I'm surprised that the Grape's logic board has a white IrDA connector which its twin doesn't have...